The ideal layer thicknesses are a multiple of the step width of the stepper motor in the Z-axis. Also, keep in mind that smaller layer thicknesses will give more accurate results, but will take much longer to print (see this article to learn how layer thickness and nozzle diameter relate to print time). However, you can’t arbitrarily choose a small layer thickness because it depends on the extruder, the material used, the stepper motors, and many other factors. If you halve the layer thickness, the resolution in the Z-direction is doubled and delivers smoother surfaces. Layer Thicknessīesides the XY resolution of your 3D printer, the layer thickness is responsible for the accuracy. You can follow the default values of this guide and then further optimize them for your device. The print settings for layer thickness, print temperature, retraction, etc. The extruder settings include the nozzle size, compatible material diameter and special G-code.īut these were only the settings for the printer. The start and end G-code looks like this:
#Creality cura download how to
You can read how to do that in this article. The printhead settings are a bit more complicated, as you have to measure the printhead manually. The size of the print bed or the print volume is quite simple as it is listed under the specifications of the printer. These include the dimensions of the print bed, whether it has a heatable print bed, what the start and end G-code should look like, how big the print head is and which extruder you are using. On the next screen, you need to set up the individual printer settings. Before that, you can give it a suitable name like “ Custom Ender 6“. To create your own profile for the Ender 6, you have to select “ Custom” and “ Custom FFF Printer” and click on “ Add“. In Creality’s slicer there is also a predefined profile for the Ender 6, which you can transfer to Cura to use the manufacturer’s recommended settings. This number is the step size of the stepper motor and gives the best results. If you wonder why this preset layer thickness is a multiple of 0.04 mm, it is because of the so-called “ magic number“. It comes with various presets for different quality levels with layer thicknesses from 0.12 to 0.28 mm. Now you have loaded the default profile for the Creality Ender 6. Click on “ Next” in the device settings.Search for Crealit圓D and select the Ender 6.In Cura’s menu bar: Settings > Printer > Add Printer….Here you will find the standard profile for the Ender 6 in Cura:
Most of the print settings like print temperature, speed or retraction are already preset very well. You don’t have to enter the dimensions of the print bed and the print head yourself and the G-code is already available. With this default profile you skip many steps when creating a new profile from scratch. The default profile for the Ender 6 in Cura is a very good starting point for further optimizations.
0 kommentar(er)
